ANGLE HEAD HEATS UP EXCESSIVELY
The right angle housing contains gears and bearings that generate heat at high RPM’s. Continuous use of the PowerFloat at maximum RPM’s is not recommended. To prevent overheating and injury to the horses’ soft tissue, the operator can periodically cool the housing by unplugging the electrical cord and inverting the grinding head and pouring cold water on it with an injection syringe or a dose syringe. Resume use after cooling. Cool only by pouring or dripping water on inverted right angle. A wet towel application to the right angle may also be used.
DO NOT IMMERSE RIGHT ANGLE INTO WATER
ALWAYS UNPLUG POWERFLOAT BEFORE COOLING THE RIGHT ANGLE HOUSIN