KEEPING THE GRINDING HEAD CLEAN
Dry brushing of the grinding wheel can be accomplished by placing a soft steel or nylon brush on the wheel and spinning the wheel at 500 to 1000 rpms. After cleaning the grinding head and right angle, remove excess tooth material from the area with a dry towel. Do not immerse the grinding wheel and right angle into water. The grinding wheel can be cleaned with a wet brush by wetting and cleaning the brush in chlorhexidene and water. If using the electric plug in model adhere to electrical safety standards and clean the grinding wheel and right angle end with the Powerfloat unplugged from the electrical outlet.After cleaning always lubricate the right angle gear system before storing the PowerFloat. It is important to prevent corrosion of the gear system by keeping the gears well lubricated with a food grade anticorrosive lubricant.
CAUTION: Wear safety glasses while performing this operation.
(DO NOT IMMERSE THE RIGHT ANGLE GRINDING HEAD IN WATER)